Parameter | Parameter Value |
Communication | Two-way communication (feedback) |
Polarity-free | The polarity (+/-) of the DALI control line does not have to be minded |
Max. count of DALI operating devices per DALI subnet | 64 +64 addresses (64 pieces of control gear and 64 control devices connected at the same time, assuming the bus power supply is sufficient) |
Max. count of DALI groups | 16 / 32 (16 groups for control gear; 32 groups for control devices) |
Max. count of DALI scenes | 16 |
DALI voltage | 9.5 V - 22.5 V, typical 16VDC -> Non SELV, because no galvanic isolation |
DALI bus power supply | max. 250 mA (depending on installed DALI power supply) |
Max. bus current consumption of load interface(e.g. driver) | 2 mA per unit |
Data transfer speed | 1,200 Baud |
Max. wire length | 300 m for a wire-cross-section (Q) of 1.5 mm2 (Between furthest-apart devices. The smaller the Q, the shorter the wire length has to be) |
NOTICE: A DALI power supply is always required for each DALI line.
